Product Support Bulletin

Page
7 of 9
PSB.2006.06.001
button. If the screen displays “R-D1 Ver. 2.0” as in the screen below, the upgrade is
correct.
Attention!
After the Firmware upgrade, the user’s “Film Settings” set-up will be maintained. In order
to reset the Film Settings back to the camera default set-up, you will need to perform an
“Initialize Settings” from the Settings menu. This will, however, also reset all user
selectable camera settings back to default set-up. The exception to “Initialize Settings” is
the camera’s language, date and time, these settings will be maintained.
R-D1 Ver. 2.0
LCD Bri
g
htness
Set Back