Product Support Bulletin

Page
6 of 9
PSB.2006.06.001
3. The screen below is displayed when the upgrade starts.
4. When the screen below is displayed, the firmware upgrade has successfully
completed. Check that the Version is “2.0”, and then turn off the camera with the
power switch.
Confirm that the firmware has been properly upgraded
Turn on the R-D1 with the power switch, turn on the LCD display by pressing the LCD
Button then bring up the Main Menu with the MENU Button Select
“Settings” (you may need to use the JOG Dial if you have images on the SD Card) and
press the ENTER Button Use the JOG Dial to select “Basic Setup” and Press the
ENTER Button, turn the JOG Dial to select “LCD Brightness” and press the ENTER