Product Support Bulletin

Page
5 of 9
PSB.2006.06.001
2. Insert the memory card containing the firmware data described above into the R-
D1 memory card slot. (See the R-D1 manual for more information on the memory
card insertion)
Perform the firmware upgrade
1. With the R-D1 turned off, simultaneously press and hold the MENU button
and the USER button then turn ON the R-D1 power switch.
Warning!
Do not remove the memory card, or turn off the power switch during the
firmware upgrade process! This will cause an upgrade failure, and may render
the camera unusable.
2. When the screen below is displayed, turn the JOG dial (see image above) until
“OK” is highlighted, then press the ENTER button