User`s guide

Customizing the Settings 35
R4CH410
User’s Guide Rev.C
06_SETNG.FM A5 size
12/11/06
R
Proof Sign-off:
tanto
category leader
editor
4
4
4
4
4
4
4
4
4
4
(Format SD Card) Formats the memory card. You can select
Quick Format or Full Format. See “Formatting
the Memory Card” on page 42 for details.
(Initialize Settings) Resets the current settings (except date and
time) to their default settings as shown below.
Setting Default Value
Color Color
Film Standard
Date YYYY/MM/DD
Power Save Timer 5min
Sequential Numbering On
LCD Brightness 5/8
Language English
USER Button Delete
(Long Exp Noise
Reduction)
Reduces noise that appears in an image taken
with a long exposure. The shooting time may
become longer depending on shooting
conditions.
(Color Space) Selects the color space from sRGB or Adobe
RGB. Adobe RGB is a wider color space than
sRGB and encompasses the colors that can be
printed with CMYK inks. Select Adobe RGB if you
have a printer that supports it.
(RAW Setting) Sets the image format recorded when shooting
in RAW mode. You can select RAW format only,
or both RAW and JPEG (high resolution) format
in a single file. RAW+JPEG provides the
convenience of viewing the JPEG image on
most computers while retaining the RAW data
for postprocessing, at an increase in image size
and memory card access time.
Setting Description
(Film Setting) Allows you to quickly switch film profiles to best
suit the shooting subject or environment. For
each film profile (Film1, Film2, or Film3), you can
assign Edge Enhance, Saturation, Tint, Contrast,
and NR (Noise Reduction). By default, Film1 is
preset for portrait, Film2 for landscape, and
Film3 for night pictures. Use Standard if no
particular profile is required.
Setting Description