User's Guide

Pairing issues
When using the product for the first time, check the following:
1. Attach the PS-500 to the cradle to wake the PS-500 from battery protection mode.
2. Enable Bluetooth
®
communication on your smart device.
3. Check smart device compatibility: epson.com/PSdevices
4. Ensure your smart device is connected to the Internet.
5. Remove any other product from the area that could interfere with the Bluetooth
®
communication.
If pairing is lost or the PS-500 has been paired with another smart device, check the following:
1. The PS-500 may already be un-paired.
If you need to un-pair your device, tap the screen twice, then press the [B] button to enter the Bluetooth
®
menu. Confirm your selection by pressing the [A] button.
2. The PS-500 already been deleted from PULSENSE View.
3. The PS-500 already been deleted in the Bluetooth® settings of your smart device.
4. Make sure Bluetooth
®
communication been enabled on your smart device.
5. Check smart device compatibility:epson.com/PSdevices
6. Ensure your smart device is connected to the Internet.
7. Remove any other product that could interfere with the Bluetooth
®
communication
• 33