User's Manual

How to Use

24
When the heart rate can’t be detected
LED
Issue
How to solve
It is likely that the device is not
fitted correctly onto your wrist.
Wear the product closely around
your wrist. Tighten the wrist band if
your pulse is not measured
correctly.
It is likely that the device is not
fitted correctly onto your wrist or
the temperature on the surface of
your skin is too low.
Wear the product closely around
your wrist. Tighten the wrist band if
your pulse is not measured correctly
and warm your wrist and fingertips if
they seem cold.
Heart rate zones
You can check your heart rate zone using the product LEDs. Setting can be made via PULSENSE View to
determine when the LEDs will illuminate. See below table for the available settings.
LED
% of max.
heart rate
LED settings
TAP
FLASH
ON
OFF
Under 40%
Blinking
OFF
(If you tap, the LED will blink)
-
40～49%
Blinking
ON
-
50～59%
↑
↑
↑
-
60～69%
↑
↑
↑
-
70～79%
↑
↑
↑
-
80～89%
↑
↑
↑
-
Above 90%
Blinking (Faster)
-