Operation Manual

When the heart rate can’t be detected
LED
Issue
How to solve
The device is not being worn
correctly onto your wrist.
Wear the product closely around
your wrist without touching the ulna
bone.
The device is not being worn
correctly on your wrist or the
temperature on the surface of your
skin is too low.
Wear the product closely around
your wrist without touching the ulna
bone. Warm your wrist and
fingertips if they seem cold.
Heart rate zones
You can check your heart rate zone using the product LEDs. The setting can adjusted via PULSENSE View to
determine when the LEDs illuminate.
The heart rate zone
Name
0 – 40%
Below
40 – 70%
Fat Burning
70 – 80%
Aerobic
80 – 90%
Anaerobic
90 -100%
Maximum
Note:
- Your initial target zone is calculated by your profile data.
- When using the PS-100 overnight, the heart rate zones will be adjusted according to your resting heart
rate.
LED
% of max.
heart rate
LED settings
TAP
FLASH
ON
OFF
Under 40% Blinking
OFF
-
40
～
49%
Blinking ON
-
Using your PS-100 • 22