Operation Manual

Installing the Software

Importing Settings From EasyMP Monitor

You can transfer setting information from EasyMP Monitor (version 4.50 or

later). Start Epson Projector Management on the same computer and the

settings are imported automatically the first time you start the software. When

finished, you see an message telling you that the settings are imported.

If you want to use the imported settings on another computer that is running

Epson Projector Management, you can save a configuration file on the

original computer using the Save Configuration File feature on the

Environment setup screen. Then copy the resulting configuration file to the

following directory on the other computer.

C:\ProgramData\SEIKO EPSON CORPORATION\Epson Projector

Management

gg Related Links

• "Environment Setup - General" p.41