Operation Manual

Sending Email Notifications
23
You can set up Epson Projector Management to send you an email alert over
the network if there is a problem with the projector. It can also send you a
recovery notification email when the projector returns to normal status.
a
• If a critical problem causes a projector to shut down, you may not
receive an email alert.
• The type of problems included in the email notification vary
depending on your projector.
a
Select Tool from the menu bar and select Environment setup.
b
Select the Mail tab.
c
Select any necessary settings.
A
Select to enable email notifications and allow you to enter the necessary
information.
B
Enter the SMTP server name or IP address for the projector's SMTP
server.
C
Select a number for the SMTP server port number using 1 to 65535.
Default is 25.
D
Select to enable TLS authentication.
E
Select to enable SMTP authentication.
F
Enter a user name for the SMTP authentication.
G
Enter a password for the SMTP authentication.
H
Enter the email address that you want to be identified as the sender. You
can enter up to 512 alphanumeric characters.
d
Select Add, select the recipient's email addresses, and then select the
type of email notifications you want them to receive.
e
Select OK.
The Environment setup screen appears. Repeat steps 4 to 5 to add
recipient's email addresses. You can register up to 10 email addresses.
f
Select OK to save your settings.
gg Related Links
• "Solutions When Network Alert Emails are not Received" p.32
• "Environment Setup - Mail" p.43