Operation Manual

Making Security Settings
22
You can improve Epson Projector Management security by restricting access
to the application and preventing anyone from changing its settings.
gg Related Links
• "Setting the Password" p.22
• "Restricting the Use of the Application" p.22
Setting the Password
You can set a password that must be entered when the application is started
or when the application lock function is enabled.
a
Select Tool from the menu bar and select Environment setup.
b
Select the General tab.
c
Select Password.
d
Do one of the following.
• Create a password for the first time: Leave the Old password field
blank.
• Change an old password: Enter the existing password in the Old
password field.
e
Enter a new password in the New password field. The password can be
up to 16 alphanumeric characters.
f
Enter the same password again in the New password (confirm) field.
g
Click OK.
The password is saved.
Restricting the Use of the Application
You can lock the application functions so that they cannot be accessed by a
third party.
a
When you set a password, you need to enter the password to release
the application lock. Using a password improves the application
security.
Open the Tool menu, and then select Application lock.
The application is locked and no operations are available except for opening
and closing the application and disabling the application lock.
To unlock the application, open the Tool menu, and then select Application
unlock. If no password has been set, you can leave these fields blank and just
click OK in the window to enter the password.