Operation Manual

Registering Projectors for Monitoring
13
e
Select the projector that you want to register.
f
Select the necessary settings for each projector.
A
Enter the name of the projector. This name is displayed in the Epson
Projector Management main screen. You can enter up to 64 characters.
B
Displays the name that has been registered to the projector.
C
Select the icon.
D
Select a group if you want to register the projector to a group. (You must
first create a group to add projectors to it.)
E
Displays the projector's IP address.
F
Enter notes about the projector, such as its location, if necessary. Notes
entered here are displayed in Projector Properties. You can enter up to
60 characters.
G
If a password has been set for the projector, enter the password here. If
you do not enter the correct password, you cannot monitor or control the
projector, even after registering the projector. For more information
about passwords, see your projector User's Guide.
g
Click Register.
To register additional projectors, repeat steps 5 to 7.
You see the registered projectors in the Epson Projector Management main
screen.
a
• To change the projector information for a registered projector,
double-click the projector in the Epson Projector Management main
screen, and then change the necessary information on the Projector
Properties screen.
• To remove a registered projector, right-click the projector in the
Epson Projector Management main screen, and then select Delete.
gg Related Links
• "Projector Properties - Information" p.36
Creating a Projector Group
Registering projectors to a group allows you to monitor and control multiple
projectors all at once. When you select a parent group, you can also monitor
and control all projectors included in multiple groups.
a
Select Projector from the menu bar and select Group Registration.
The Group Registration screen appears.