Operation Manual

Registering Projectors for Monitoring
12
To monitor or control projectors, you must register the projectors to Epson
Projector Management. Once you registered, the projector status is
automatically displayed when you start Epson Projector Management.
If you need to register a large number of projectors, you can create projector
groups so you can monitor and control the projectors in small units. First
create your projector groups and then register each projector to a group.
You can register up to 2000 projectors and groups in total. To monitor a large
number of projectors, make sure your computer meets or exceeds the system
requirements.
gg Related Links
• "Searching for Projectors" p.12
• "Creating a Projector Group" p.13
• "System Requirements" p.7
Searching for Projectors
You can search for projectors on the same segment automatically, as well as
searching for projectors by specifying an IP addresses.
a
Start Epson Projector Management.
• Windows 7: Click Start, select Programs (or All Programs), EPSON
Projector, and then click Epson Projector Management Ver.X.XX.
• Windows 8.1: Navigate to the Apps screen and select Epson
Projector Management Ver.X.XX.
• Windows 10: Select Start, select EPSON Projector, and then select
Epson Projector Management Ver.X.XX.
Epson Projector Management starts.
b
Select Projector from the menu bar and select Projector Registration.
The Projector Registration screen appears.
c
Select a search mode.
• Select Automatic search to search for the projector on the same
network.
• Select Manual search to search for the projector by specifying the IP
address. Enter an IP address.
• Select Range search to search for the projector by setting an IP
address range. Enter an IP address in Start IP Address and End IP
Address.
a
If you want to search non-Epson projectors that support PJLink
Class2 automatically, select Search for Projectors in PJLink.
d
Click Search.
You see a list of network projectors.