Operation Manual

Selecting Projector Network Settings
10
a
To set up a network connection, if necessary, see the
documentation supplied with your computer or network adapter.
c
Install the wireless LAN unit in the projector, if necessary. See your
projector User's Guide for instructions.
d
Turn on the projector.
e
Press the [Menu] button on the remote control or the control panel,
select the Network menu, and then select Network Configuration.
f
Select Wireless LAN.
A screen like one of the following is displayed.
g
Turn on wireless LAN support.
a
The necessary settings vary depending on your projector. See
your projector User's Guide for instructions.
h
Select Advanced for Connection Mode.
i
Select other options as necessary for your network. See your projector
User's Guide for instructions.
j
Select security settings on the Security menu as necessary for your
network. Check with your network administrator for more information
on making the correct settings.
k
When you have finished making settings, select Setup Complete or
Complete, and follow the on-screen instructions to save your settings
and exit the menus.
gg Related Links
• "Solutions When You Cannot Connect Projectors Using Advanced
Connection Mode (Wireless)" p.30