user manual

Using the Remote Control Using the Control panel
q
You can save at 400 x 300 dots in size.
E When "Select this image?" is displayed, select Yes.
F Select the zoom factor from the zoom setting screen.
G When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
q
• When a User's Logo is saved, the previous User's Logo is erased.
• Saving the user's logo may take approximately 15 seconds. Do
not use the projector or any connected equipment while it is
saving, otherwise malfunctions may occur.
Saving a User's Logo
106