user manual
Table Of Contents
- Notations Used in This Guide
- Contents
- Projector Features
- Part Names and Functions
- Useful Functions
- Changing the Projected Image
- Functions for Enhancing Projection
- Selecting the Projection Quality (Selecting Color Mode)
- Setting the Auto Iris
- Hiding the Image and Sound Temporarily (A/V Mute)
- Freezing the Image (Freeze)
- Changing the Aspect Ratio
- Pointer Function (Pointer)
- Enlarging Part of the Image (E-Zoom)
- Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)
- Restrictions in the Target Projector when Using Multiple Projectors
- Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
- Security Functions
- Configuration Menu
- Troubleshooting
- Appendices
- Installation Methods
- Cleaning
- Replacing Consumables
- Optional Accessories and Consumables
- Saving a User's Logo
- Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-1735W/1725/1723 only)
- Screen Size and Distance
- Connecting and Removing USB Devices (EB-1735W/1725/1723 only)
- Connecting with a USB Cable and Projecting (USB Display EB-1735W/1725/1723 only)
- Reading Problem Mail Notification Function (EB-1735W/1725/1723 only)
- ESC/VP21 Commands
- Regarding Network Projector (EB-1735W/1725/1723 only)
- About PJLink
- List of Supported Monitor Displays
- Specifications
- Appearance
- Glossary
- Index
Problem Solving
66
f m o Indicator is lit or flashing orange
Red Red Red
Auto Iris Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide.
s
Epson Projector Contact List
: Lit : Flashing : Off : Varies according to the projector status
Status Cause Remedy or Status
High Temp Warning (This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it. s p.78, 84
Replace Lamp Replace it with a new lamp. s p.81
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases.
Replace it with a new lamp as soon as possible.
q
• If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No
Help".
s
p.67
• If the error is not indicated in this table, stop using the projector, disconnect the power cable from the electrical outlet, and contact your
local dealer or the nearest address provided in the Support and Service Guide.
s
Epson Projector Contact List
: Lit : Flashing: : Off
Status Cause Remedy or Status
Warning
Orange Red
Orange