user manual
Table Of Contents
- Notations Used in This Guide
- Contents
- Projector Features
- Part Names and Functions
- Useful Functions
- Changing the Projected Image
- Functions for Enhancing Projection
- Selecting the Projection Quality (Selecting Color Mode)
- Setting the Auto Iris
- Hiding the Image and Sound Temporarily (A/V Mute)
- Freezing the Image (Freeze)
- Changing the Aspect Ratio
- Pointer Function (Pointer)
- Enlarging Part of the Image (E-Zoom)
- Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)
- Restrictions in the Target Projector when Using Multiple Projectors
- Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
- Security Functions
- Configuration Menu
- Troubleshooting
- Appendices
- Installation Methods
- Cleaning
- Replacing Consumables
- Optional Accessories and Consumables
- Saving a User's Logo
- Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-1735W/1725/1723 only)
- Screen Size and Distance
- Connecting and Removing USB Devices (EB-1735W/1725/1723 only)
- Connecting with a USB Cable and Projecting (USB Display EB-1735W/1725/1723 only)
- Reading Problem Mail Notification Function (EB-1735W/1725/1723 only)
- ESC/VP21 Commands
- Regarding Network Projector (EB-1735W/1725/1723 only)
- About PJLink
- List of Supported Monitor Displays
- Specifications
- Appearance
- Glossary
- Index

List of Functions
57
f Mail menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent e-mail,
s "Reading Problem Mail Notification Function (EB-1735W/1725/1723 only)" p.98
Sub Menu Function
Mail Notification
function
You can set whether or not (On/Off) to be notified by e-mail.
SMTP server You can input the IP addressg for the SMTP server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number You can input the port number for the SMTP server. The default value is 25 You can input numbers between 1 to 65535.
Email Address 1/
Email Address 2/
Email Address 3
You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You can enter up to
32 single-byte alphanumeric characters for the e-mail addresses.
Setting a Notification
Event
You can select the problems or warnings to be notified about by e-mail. When the selected problem or warning occurs in the projector, an e-mail is
sent to the specified "Destination address" notifying that a problem or warning has occurred. You can select multiple items from the displayed items.