user manual
Table Of Contents
- Notations Used in This Guide
- Contents
- Projector Features
- Part Names and Functions
- Useful Functions
- Changing the Projected Image
- Functions for Enhancing Projection
- Selecting the Projection Quality (Selecting Color Mode)
- Setting the Auto Iris
- Hiding the Image and Sound Temporarily (A/V Mute)
- Freezing the Image (Freeze)
- Changing the Aspect Ratio
- Pointer Function (Pointer)
- Enlarging Part of the Image (E-Zoom)
- Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)
- Restrictions in the Target Projector when Using Multiple Projectors
- Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
- Security Functions
- Configuration Menu
- Troubleshooting
- Appendices
- Installation Methods
- Cleaning
- Replacing Consumables
- Optional Accessories and Consumables
- Saving a User's Logo
- Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-1735W/1725/1723 only)
- Screen Size and Distance
- Connecting and Removing USB Devices (EB-1735W/1725/1723 only)
- Connecting with a USB Cable and Projecting (USB Display EB-1735W/1725/1723 only)
- Reading Problem Mail Notification Function (EB-1735W/1725/1723 only)
- ESC/VP21 Commands
- Regarding Network Projector (EB-1735W/1725/1723 only)
- About PJLink
- List of Supported Monitor Displays
- Specifications
- Appearance
- Glossary
- Index
List of Functions
56
f Wired LAN Menu
Sub Menu Function
DHCPg You can set whether or not (On/Off) to use DHCP.
If this is set to "On" you cannot set any more addresses.
IP Addressg You can input the IP address assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Maskg You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet
masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Addressg You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address Displays the MAC address.
IP Address Display To prevent the IP address from being displayed on the EasyMP Standby screen, set this to Off.