user manual
Table Of Contents
- Notations Used in This Guide
- Contents
- Projector Features
- Part Names and Functions
- Useful Functions
- Changing the Projected Image
- Functions for Enhancing Projection
- Selecting the Projection Quality (Selecting Color Mode)
- Setting the Auto Iris
- Hiding the Image and Sound Temporarily (A/V Mute)
- Freezing the Image (Freeze)
- Changing the Aspect Ratio
- Pointer Function (Pointer)
- Enlarging Part of the Image (E-Zoom)
- Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)
- Restrictions in the Target Projector when Using Multiple Projectors
- Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
- Security Functions
- Configuration Menu
- Troubleshooting
- Appendices
- Installation Methods
- Cleaning
- Replacing Consumables
- Optional Accessories and Consumables
- Saving a User's Logo
- Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-1735W/1725/1723 only)
- Screen Size and Distance
- Connecting and Removing USB Devices (EB-1735W/1725/1723 only)
- Connecting with a USB Cable and Projecting (USB Display EB-1735W/1725/1723 only)
- Reading Problem Mail Notification Function (EB-1735W/1725/1723 only)
- ESC/VP21 Commands
- Regarding Network Projector (EB-1735W/1725/1723 only)
- About PJLink
- List of Supported Monitor Displays
- Specifications
- Appearance
- Glossary
- Index
List of Functions
54
f When WEP is selected
Sub Menu Function
WEP encryption You can set the encryption for WEP encoding.
128 bit: Uses 128 (104) bit encoding
64 bit: Uses 64 (40) bit encoding
Format You can set the input method for the WEP encrypted key.
ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the network
administrator for the network in which the projector participates, and then set to "ASCII".
HEX: Input in hexadecimal.
Key ID Selects the WEP encryption ID key.
Encrypted key 1/
Encrypted key 2/
Encrypted key 3/
Encrypted key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for
the network in which the projector participates. The type of character and the number that can be entered differ according to the "WEP
Encryption" and "Format" settings.
If the number of characters you enter is shorter than the required character length, no character is encrypted. If the number of characters you enter
is longer than the required character length, characters that exceed the permitted number are not encrypted.
"128 bit" - "ASCII": Single-byte alphanumerics, 13 characters.
"64 bit" - "ASCII": Single-byte alphanumerics, 5 characters.
"128 bit" - "HEX": 0 to 9 and A to F, 26 characters
"64 bit" - "HEX": 0 to 9 and A to F, 10 characters