User Setup Information

Selecting options
A solid cursor bar highlights the option currently selected. You
can scroll through the options using [II and m When
you reach an option you want to change,
press [Mwl to select
it. The current setting flashes. Then press
b
+ or I-] to than
d
e
the setting. When the setting is correct, press [tl or 1 to
go to the next option.
To use the cursor control keys on the numeric keypad, press
CZJ to turn off the num lock function, if necessary.
The table below lists the keys you can use to perform SETUP
operations.
In]
Displays a help screen describing some of the keys you
can use with the program
Displays the date and time prompts so you can set a
new date and/or time
IF11
Sets all the options to the settings last stored In the
CMOS RAM
m
Sets all the options to their default settings
Saves the current configuration settings In your
computer’s CMOS RAM
I
I*],[71
Allows you to save or discard your current settings and
exit the program
Move the cursor to the next or previous option and
highlight it
Move the cursor to the first or last SETUP option and
highlight it
Move the cursor to the first option under the previous or
next heading and display the previous or next heading
that can appear on the screen; also scroll through user
defined non-cache areas In 256KB Increments
2-4 Running the SETUP Program