Setup guide

You do not see the save and Exit option because you have
already saved the latest chart es to your computer’s CMOS
RAM when you pressed
b
el
FlO . Highlight No Save and
Exit and press
brcr The computer reboots and tries to load
your operating system from a diskette or your hard disk drive.
If you made additional changes to your settings after you
pressed [F101, press m to exit SETUP. You see the
following menu:
Save and Exit
No Save and Exit
Return to Setup
To save your additional changes, highlight Save and Exit
and press m The computer saves the latest settings in its
CMOS RAM and reboots.
If you do not want to save your additional changes, highlight
No Save and Exit and press m The computer does not
save any changes you made since you pressed
p7
F10 .
However, the computer still reboots to so it can use the settings
you saved in your CMOS RAM and then tries to load your
operating system from a diskette or your hard disk drive.
(To remain in the SETUP program, highlight Return to
Setup and press m The exit menu disappears and you see
the current SETUP screen.)
2-28 Running the SETUP Program