Setup guide

You made changes and want to exit SETUP without
saving the changes
Press [ You see the following menu:
Save and Exit
No Save and Exit
Return to Setup
Highlight No Save and Exit and press [M*l. The
computer does not save any changes you made to your SETUP
options. The computer reboots and tries to load your operating
system from a diskette or your hard disk drive.
To remain in the SETUP program, highlight Return
to
Setup and press [Mwl. The exit menu disappears and you see
the current SETUP screen.
You saved your settings with
(
You can save your changes and remain in SETUP by pressing
[ any time you are using the program. When you press
[, you see a message confirming that your changes are
saved. Press (Enlwl to erase the message and return to SETUP.
The manner in which you exit SETUP after using the [F101
key depends on whether you made any changes to your
settings after pressing
c5
F10
If you have made no further changes to your SETUP options
and press [ to exit SETUP, you see the following menu:
No Save and Exit
Return to Setup
Running the SETUP Program
2-27