Setup guide

Changing a Password
If you need to change the password you set, follow these steps:
1.
2.
3.
4.
5.
6.
If you are already running SETUP, go to step 2.
If you are not running SETUP, follow the instructions at the
beginning of this chapter to start SETUP.
Highlight the Password option and press [En(wl. The current
settingis Set.
Press [F2). You see a prompt to enter your old password.
Type your old password and press [Mwl.
At the next prompt, type a new password and press [Mwl.
You see a prompt to reenter your password. Enter your new
password again.
Be sure to save your settings as you exit SETUP to keep your
new password. See page 2-25 for instructions.
Deleting a Password
If you want to delete the password you set and disable
password security, follow these steps:
1. If you are already running SETUP, go to step 2.
If you are not running SETUP, follow the instructions at the
beginning of this chapter to start SETUP.
2. Highlight the password securityoption and press [En#l.
The current setting is Installed.
Running the SETUP Program
2-17