Setup guide

Installed Equipment
SETUP displays information about the following equipment
that it detects in your system under the Installed
equipment heading:
0 Number of diskette drives
Q Video type
Q Math coprocessor.
You cannot change the settings for Number of diskette
drives or Video type. However, you may want to check the
Math coprocessor setting to make sure it matches your
configuration.
The Number of diskette drives installed can be 1 or 2.
You can set the type(s) of diskette drive(s) you have installed
under the Diskette Drives heading. See page 2-19 for more
information.
The Video type can be one of the following:
Q EGA or VGA
P 40 Column Color
Q 80 Column Color
Q Monochrome.
If you are using the built-in VGA port, or if you install an EGA
or VGA display adapter card, SETUP displays EGA
or V GA as
the video type. If you install a CGA display adapter card,
SETUP displays either 40 Column Color or 80 Column
Color. SETUP displays Monochrome if you install a
monochrome display adapter card.
Running the SETUP Program
2-11