Setup guide

The Shadow RAM areas option allows you to enable or
disable shadow RAM in the address ranges listed below. The
default setting for each area is listed in parentheses. (If
necessary, press [ to display the options.)
P COOOOh - C3FFFh (Enabled)
0 C4WOh - C7FFFh (Enabled)
Q C8OOOh - CBFFFh (Enabled)
Q CCOOOh - CFFFFh (Enabled)
Q DOOWh - D3FFFh (Disabled)
Q D4NOh - D7FFFh (Disabled)
Q D8OOOh - DBFFFh (Disabled)
Q DCOOOh - DFFFFh (Disabled)
Q EOOOOh - E3FFFh (Disabled)
Q E4OOOh - E7FFFh (Disabled)
Q E8OOOh - EBFFFh (Disabled)
0 ECOOOh - EFFFFh (Disabled).
To enable or disable shadow RAM at an address, select the area
and press a or m to change the setting.
Note
Your computer automatically enables shadow RAM in the
address area F0000h through FFFFFh. You cannot disable
shadow RAM in this area.
Running the SETUP Program 2-9