User Setup Information

Setting the Hard Disk Drives(s)
The SETUP program lets you select the type of hard disk
drive(s) installed in your computer. If you have two hard disk
drives, the first one is drive 1 and the second one is drive 2. Be
sure to choose the correct setting for both drives.
Follow these guidelines:
0 If your system does not have a hard disk, select Not
installed for drives 1 and 2 If you have only one hard
disk drive, select Not
installed for drive 2
0 If your computer came with an Epson 120MB hard disk
drive, or if you installed this drive, select type 39 for
drive 1. For the Epson 240MB hard disk drive, select type 34.
0 If you have installed another type of hard disk drive, you
need to select the drive type that matches your drive. See
“Hard Disk Drive Types” below.
Hard Disk Drives Types
If you installed a hard disk in your computer that is not
the standard Epson 120MB drive (type 33) or 240MB drive
(type 34), you need to select the correct type to match your
drive.
The foliowing table lists the types of standard hard disk drives
you can use. Check this table and the documentation supplied
with your hard disk to find the correct type number for your
drive. (Your drive’s documentation should list all the
parameters necessary to identify it in this table.) If none of the
types listed matches your drive, see "Defining your own drive
type” on page 2-23.
2-20
Running the SETUP Program