User Setup Information

Setting the Keyboard Options
There are four keyboad options available:
0 Keyboard function
0 Keyboard delay
0 Keyboardspeed
0 Num Lock status after boot.
The Keyboard function option allows you to change the
Keyboard delay and keyboard speed option settings. If
Keyboard function is Enabled (the default setting), you can
change the other settings. If Keyboard function is Disabled,
the Keyboard delay and speed settings are listed as N/A and
you cannot change them. You can change the Num Lock
status after boot setting anytime.
The Keyboard delay option allows you to select a delay
period between the time you press a key and the time the
character appears on the screem. You can select a delay of 0,250,
500, 750, or 1000 ms (milliseconds); the higher the number, the
longer the delay. The default setting is 250
ms, or 4 second.
The Keyboard
speed option sets the rate at which a character
repeats when you hold down a key. You can select virtually
any speed between 002 and 031 kps (keys per second); the
higher the number, the faster the repeat rate. The default
setting is 020 kps.
The Num Lock status after boot option allows you to
select the initial state of the num lock function when you turn
on or reset your system. You can select ON or OFF; the default
setting is ON.
Running the SETUP Program 2-11