User Setup Information

Setting the Date and Time
The real-time clock in your computer continuously tracks the
date and time--even when the computer is turned off. Once
you set the date and time using SETUP you should not need to
change them, unless you need to adjust the time for daylight
savings or other seasonal adjustments. (The computer
automatically changes the date for leap years.)
To change the date and/or the time, follow these steps:
1. Press [FSL You see the date prompt, such as the following:
Enter the date In mm/dd/yyyy format.
09/15/1993
2. If the entire date is correct, press [andgotostep5.
If you need to change the date, type two digits for the current
month (mm), such as 09. The cursor moves to the day (dd)
field.
3. Type a two-digit number for the current day (such as 06 or
15). The cursor moves to the year (yyyy) field.
4. Type fom digits for the year, such as 1993, and press m
(Ifyoumakeamistake,press
&~toerasethe
charactersbeforeyoupxess[)
If you entered an invalid date (such as month 13), you see the
date prompt again. Follow steps 2 through 4 to correct it.
5. Now you see the time prompt:
Enter the time in hh:mm:ss format.
16:03:47
If the time is correct, press @El.
2-6 Running the SETUP Program