User's Manual

If the program finds an unflagged bad track, the report is
followed by a table like this:
Writm, Read lkror Tracks
Cylinder HoadCylindor Emad Cylinder EerdCylWder Head
a37 2
Confirm to ragiotrr tha traak8 in the Write, Rmad Error
Track Table am bad tracke.
Do yuu went to regbter the error trackm a8 bad tracks?
w/w
To flag these tracks as bad, select Y . You see a list of the tracks
as they are flagged. When the process is complete, press [Enbrl
to return to the Hard Disk Format Menu.
Option 3, Non-destructive Surface Analysis
The Non-destructive surface analysis does not destroy any
data, and you can use it to safely check the condition of your
hard disk drive. However, this test does not flag any bad tracks
it detects.
To start the test, select Non-destructive surface
analysis from the Hard Disk Format Menu. You see these
messages:
Analyze Hard Disk <Drive 9:~
Read/Verify check for all tracks...
Current cylinder is nnnn
5-10 Formatting a Hard Disk