Specifications

Erasing
Activating the Message
Center
If you do not want to change the message, press SET three times to
return to the date/time display.
If you want to change the message, you do not need to erase the
old one. Record a new message as described above.
You can erase your outgoing message, but in normal operation
you do not need to do so. Erasing your OGM automatically turns
off the message center function.
If you have recorded an outgoing message and selected ERASE,
the following appears:
MSG CENTER
OGM:ERASE
Press START to erase the OGM. The message OGM ERASED
appears for two seconds.
Press SET three times to return to the date/time display.
After you have recorded a message, you must also turn on the
Message Center function Follow-tie-steps below:
Make sure no document is in the feeder.
Press FUNCTION..
Press 7.
4-12