Specifications

Using the PriorityFax as a Telephone
Move the switch left to H for higher volume and right to N for
lower (normal) volume.
Using Standard
There are two ways to start dialing a telephone call: lifting the
Dialing
handset or pressing the SPKR button.
To adjust the ringer switch
Locate the RINGER switch on the left side of the telephone cradle
to the right of the HANDSET switch.
Move the switch left to H for high, center to L for low, or right to
OFF for no ringing.
To use the handset, simply lift the handset off the cradle, wait for a
dial tone, and dial the number.
To use the SPKR button, follow these steps:
Press SPKR.
Leaving the handset in its cradle, wait for the dial tone, and then
dial the number.
Note
Remember that you can adjust the speaker volume by
moving the dial on the back control panel of the fax
machine.
When you hear the number start ringing, lift the handset.
The
PriorityFax does not act as a speaker phone. You cannot speak to
someone on the other end without using the handset.
3-5