Specifications

Using the PriorityFax

Press FUNCTION.

Press 2.

Press the # cursor key until you see the following display:

FAX ONE TOUCH #

Press START. The list begins printing.

Using one-touch faxing After you have registered the one-touch numbers, you can send a

fax to any of those numbers in just three steps:

Insert the document in the feeder. The ready display appears:

FAX/COPY READY

STD

NORMAL

Press the one-touch button for the number you want to use;

then press START.

If you have not registered a number for the button you pressed,

the message NOT REGISTERED appears.

When you press START, the fax machine starts feeding the first

page and starts dialing.

If the receiver’s fax machine answers, the PriorityFax starts

transmission automatically. If the receiver’s fax machine is busy,

the PriorityFax automatically enters the automatic redial mode.

You can also use a one-touch button for dialing after pressing

SPKR or lifting the handset. (This is manual sending). In this

case, you need to press START after hearing the fax tone from the

receiver’s fax machine, and it will not enter the automatic redial

mode.