Specifications

LCD Error Messages
(continued)
•
•
•
•
•
•
•
•
Troubleshooting
COMM ERROR
Press STOP.
Documents may not have been fed correctly. Resend the
documents (up to five pages at a time).
The procedure for sending a document was improper. See
Chapter 2 and try sending the document again.
The receiving party may have a problem during
transmission. Call the receiver.
The document was removed from the fax machine during the
Redial function. Insert the document and begin the sending
procedure again.
PAPER JAM
Press STOP and open the paper cover. Remove the jammed
paper, and reload the paper as described in Chapter 1.
You have tried to use a one-touch or speed dial number that
you have not yet registered. See Chapters 2 and 3 for how to
register these numbers.
The memory cannot store any more data. Either press STOP
to erase the whole memory, or press START if you wish to
send the stored data out of memory.
5-7