Specifications

Troubleshooting
Sending
(continued)
Documents you sent are received blank.
•
Be sure you sent the document through the fax machine face
down. Resend the document, being careful to place the
document in the feeder face down.
One-touch or speed dial faxing does not work.
•
•
•
You may have used a one-touch or speed dial number that is a
telephone number, not a fax number. Check to be sure the
number you are dialing is a fax number, and try again.
You may have pushed a one-touch or speed dial number that is
not registered properly. Check Chapter 2 for proper
registration procedures.
Delayed Sending is set. Turn off Delayed Sending before using
one-touch or speed dial faxing.
Receiving
Manual reception doesn’t work.
•
A document is in the feeder. Remove the document and try
manual reception again.
Recording paper is jammed.
•
Push down on the recording paper cover button to open up
the fax machine. Pull out the jammed recording paper. Use
scissors to make a clean edge on the end of the paper roll.
Reinsert the paper according to the instructions in Chapter 1.
Received copies are blank.
•
The recording paper roll may be in upside down. Reinsert
the paper according to the instructions in Chapter 1.
•
Documents may have been sent to you incorrectly. Check with
the sending party.
5-3