User guide
Table Of Contents
- Contents
- Introduction
- System setup
- Software overview
- Network setup
- Loading originals and print media
- Copying
- Basic printing
- Scanning
- Faxing
- Setting the fax header
- Adjusting the document settings
- Sending a fax automatically
- Sending a fax manually
- Confirming a transmission
- Automatic redialing
- Redialing the last number
- Selecting the paper tray
- Changing receiving modes
- Receiving automatically in Fax mode
- Receiving manually in Tel mode
- Receiving manually using an extension telephone
- Receiving automatically in Ans/Fax mode
- Receiving faxes using DRPD mode
- Receiving in secure receiving mode
- Receiving faxes in memory
- Printing received faxes on both sides of paper
- Sending a fax to multiple destinations
- Sending a delayed fax
- Sending a priority fax
- Forwarding faxes
- Sending a Fax from a PC
- Fax setup
- Using USB flash memory
- Ordering supplies and accessories
- Maintenance
- Troubleshooting
- Installing accessories
- Specifications
- Index
- SOFTWARE SECTION
- Software section Contents
- Installing Printer Software in Windows
- Using SetIP
- Basic Printing
- Advanced Printing
- Using Windows PostScript Driver
- Sharing the Printer Locally
- Using Utility Applications
- Scanning
- Using Your Printer in Linux
- Using Your Printer with a Macintosh
- Software section Index
6.3 <
Copying>
ID card copying
Your machine can print 2-sided originals on one sheet
of A4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or
A6-sized paper.
When you copy using this feature, the machine prints
one side of the original on the upper half of the paper
and the other side on the lower half without reducing
the size of the original. This feature is helpful for
copying a small-sized item, such as a name card.
This copy feature is available only when you place
originals on the scanner glass.
1 Press Copy.
2 Place a single original face down on the scanner
glass.
For details about loading an original, see
page 5.1.
3 Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4 Press the Scroll buttons until ID Copy appears
and press Enter.
Place Front Side and Press[Start] appears on
the display.
5 Press Enter or Start.
Your machine begins scanning the front side and
shows Place Back Side and Press[Start].
6 Open the scanner lid and turn the original over.
Note
If you press Stop/Clear or if no buttons
are pressed for approximately
30 seconds, the machine cancels the
copy job and returns to Standby mode.
7 Press Start to begin copying.
Note
If the original is larger than the printable area,
some portions may not be printed.
Poster copying
Your machine can print an image onto 9 sheets of
paper (3x3). You can paste the printed pages together
to make one poster-sized document.
This copy feature is available only when you place
originals on the scanner glass.
1 Press Copy.
2 Place a single original face down on the scanner
glass.
For details about loading an original, see
page 5.1.
3 Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4 Press the Scroll buttons until Poster Copy
appears and press Enter.
5 Press the Scroll buttons to select Yes.
6 Press Enter or Start to begin copying.
Note
You cannot adjust the copy size using the
Reduce/Enlarge button when making a
poster.
Your original is divided into
9 portions. Each portion is scanned
and printed one by one in the
following order: