User guide
Table Of Contents
- Contents
- Introduction
- System setup
- Software overview
- Network setup
- Loading originals and print media
- Copying
- Basic printing
- Scanning
- Faxing
- Setting the fax header
- Adjusting the document settings
- Sending a fax automatically
- Sending a fax manually
- Confirming a transmission
- Automatic redialing
- Redialing the last number
- Selecting the paper tray
- Changing receiving modes
- Receiving automatically in Fax mode
- Receiving manually in Tel mode
- Receiving manually using an extension telephone
- Receiving automatically in Ans/Fax mode
- Receiving faxes using DRPD mode
- Receiving in secure receiving mode
- Receiving faxes in memory
- Printing received faxes on both sides of paper
- Sending a fax to multiple destinations
- Sending a delayed fax
- Sending a priority fax
- Forwarding faxes
- Sending a Fax from a PC
- Fax setup
- Using USB flash memory
- Ordering supplies and accessories
- Maintenance
- Troubleshooting
- Installing accessories
- Specifications
- Index
- SOFTWARE SECTION
- Software section Contents
- Installing Printer Software in Windows
- Using SetIP
- Basic Printing
- Advanced Printing
- Using Windows PostScript Driver
- Sharing the Printer Locally
- Using Utility Applications
- Scanning
- Using Your Printer in Linux
- Using Your Printer with a Macintosh
- Software section Index
5.9 <
Loading originals and print media>
Printing to the rear cover
Using the rear cover, paper comes out of the machine face up.
Printing from the multi-purpose tray to the rear cover provides a straight
paper path. Using the rear cover might improve the output quality with
special print media.
To use the rear cover, open it by pulling down.
Caution
The fuser area inside the rear cover of your machine becomes
very hot when in use. Take care when you access this area.