User`s manual

ESC *
Select Graphics Mode
Format:
ASCII code:
ESC
Decimal :
27
Hexadecimal: 1B
* (m) (n1) (n2)
42 (m) (n1) (n2)
2A (m) (n1) (n2)
Comments:
Turns on graphics mode m. See Chapter 7 for details on the 7 modes
available.
If d is the total number of dots required,
nl = d MOD 256
n2 = INT(d / 256)
This command must be followed by d data numbers.
ESC ?
Reassign Graphics Mode
Format:
ASCII code: ESC
?
(s) (n)
Decimal:
27
63
(s) (n)
Hexadecimal: 1B 3F
(s) (n)
Comments:
Changes one graphics mode to another. The variable s is a character
K, L, Y or Z, which is reassigned to a mode O-6.
ESC ^
Format:
ASCII code: ESC
Decimal : 27
Hexadecimal: 1B
Comments:
Select 9-Pin Graphics Mode
^ (m) (n1) (n2)
94 (m) (n1) (n2)
5E (m) (n1) (n2)
Turns on 9-pin graphics mode. Where m defines density of print (0
for single and 1 for double) and d is the total number of dots
required nl and n2 are as below:
nl = d MOD 256 and n2 = INT(d / 256)
and are followed by two times d data bytes. The printer expects two
data items for each column of print.
c-21