User`s manual

Tabs

Tab Horizontally

Format:

ASCII code: HT

Decimal:

Hexadecimal: 09

Control:

CTRL I

Comments:

Advances the print position to the next horizontal tab setting.

ESC D

Format:

ASCII code:

ESC

Decimal :

Hexadecimal: 1B

Comments:

Set Horizontal Tabs

D (n1) (n2) . . . 0

68 (n1) (n2) . . . 0

44 (n1) (n2) . . . 00

This command allows setting of up to 32 horizontal tabs. These are

entered as nl, n2, n3 etc. (in the range

to 255) with ASCII 0 as the

terminator. The tab settings nl, n2, n3 etc. must be entered in

ascending order. If nl = 0, all tabs are cleared. The settings on

power up or after an ESC @ command are every eight characters.

Format:

ASCII code: VT

Decimal:

Hexadecimal: OB

Control:

CTRL K

Comments:

Tab Vertically

Advances the paper to the next tab setting in the channel selected by

ESC /. If no channel has been selected, channel 0 is used. If no

vertical tabs have been selected, the paper advances one line.

C-16