User`s manual

Control Panel
After connecting your LX-90 to your computer system, turn on the
printer and look at the control panel, which is shown in Figure l-4.
Figure l-4. Control panel
You have already used the control panel for a special purpose,
printing the self test. Here are the main functions of the lights and
buttons on this panel:
l The POWER light glows green when the power is on.
l The READY light
glows green when the printer is ready to accept
data. Don’t worry if this light flickers somewhat during printing;
this flickering is normal.
l The PAPER OUT light glows red when the printer is out of paper or
the paper is loaded incorrectly.
l The ON LINE light glows green when the printer can receive data.
In addition to the lights, the control panel has three buttons.
l ON LINE-switches the printer between on line and off line status.
When the printer is on line, the ON LINE light glows and the printer
is ready to accept data.
6