User`s guide

Publishing Discs 65
Taking Out Discs
Follow the steps below to take out the published/read discs from the stackers.
1. Open the disc cover.
2. Take out the stacker only when the output stacker is stacker 2.
3. Take out the published/read discs from the stacker. The output stacker differs
according to the publish mode. Refer to the following table.
Note:
❏ Be sure to let printed discs dry completely before using them or touching the printed surface.
Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24
hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
Output stacker Publish mode Number of discs
Stacker 2 Standard mode
Read Back mode
Up to about 50 discs
Stacker 3 Standard mode
Low-volume mode
Up to about 20 discs
Stacker 2 Stacker 3