User`s guide

7
Chapter 1 TD Bridge Overview
1
TD Bridge
Total Disc Maker
INP
STF
RJD
㧼㧾㧺
Write
data
Print
data
Your Cooperative Application
In the same computer
Monitoring
Folder
Start writing
RJD -> INP
Updated every
5 seconds
Disc image
data
PP-100/PP-100N
Prepare
Set data
Preprocessing
Starts writing
End
Check during
operation
TD Bridge
Total Disc Maker
STF
JDF RJD
㧼㧾㧺
Ԙ
ԙ
Ԛ
Ԛ
Write
data
Print
data
Your Cooperative Application
In the same computer
Monitoring
Folder
Preprocessing
JDF -> RJD
Job information
is written
Disc image
data
PP-100/PP-100N
In the preprocessing process, the JDF file is
checked for discrepancy and then a disc burn
image (CD/DVD image) is created if necessary.
(1) TD Bridge keeps monitoring the folder to
monitor.
(2) When a JDF file is found in the folder,
preprocessing is started.
(3) The JDF file is read and preprocessing is started.
At this process, the JDF file is changed to RJD
(Received Job Description) file.
When writing is started, the RJD file is changed to
INP (IN Process) file. The job information is written
to a STF file.
Preprocessing Start writing/printing
When writing or printing is started, the RJD file is
changed to INP (IN Progress) file.
The job information is written to a STF (STatus File)
file.
TD Bridge
Total Disc Maker
STF
㧼㧾㧺
INP
Your Cooperative Application
In the same computer
Monitoring Folder
Updated every
5 seconds
Disc image
data
Check
as necessary
PP-100/PP-100N
TD Bridge
Total Disc Maker
STF
㧼㧾㧺
INP DON
Your Cooperative Application
In the same computer
Monitoring Folder
Job information
is updated
Disc image
data
Check
as necessary
Completed
INP - DON
Completed Disc
>
PP-100/PP-100N
Log folder
Prepare
Set data
Preprocessing
Starts writing
End
Check during
operation
When publishing discs is completed, the INP file is
changed to DON (DONe) file.
DON file moves to a log folder after one or two
hours.
The STF file is updated every five
seconds. The cooperative application
checks the STF file as necessary.
Check during the operation Completion of the job