User`s guide

51
Chapter4 Development Guide for a Cooperative Application
4
When the label file has margins or trim marks, they are printed as they are.
Specifying the print area
If the file type of the label file is any one of BMP/JPEG/TIFF/PNG, the outside/Inside diameter of the print
area can be specified. This setting is optional.
LABEL_AREA=DiscDiamOut: Outside diameter (tab character) DiscDiamIn: Inside diameter
• Outside diameter (optional)
Specify the outside diameter of the disc print area in units of 1/10 mm. Available area is 700 to 1194.
When it is not specified, the outside diameter is set to 1160 mm.
• Inside diameter (optional)
Specify the inside diameter of the disc print area in units of 1/10 mm. Available area is 180 to 500. When it
is not specified, the outside diameter is set to 450 mm.
Label file
Margin
Outside of the print area of the disc
Print area of the disc
Image before printing Image after printing
Print area
Outside of print area
DiscDiamOut
DiscDiamIn
Outside/inside diameter image