User`s guide

41
Chapter4 Development Guide for a Cooperative Application
4
Setting Item List
The table below lists the available setting items in a JDF file. You may not need some of the settings.
Referring to each explanation, include the settings only required for your system.
Key name: Case sensitive. A key name including lowercase characters is ignored as an invalid command.
Spaces before and/or after a key name also make the key name invalid.
Setting: Characters written from immediately after "=" to a linefeed code or EOF are regarded as the
setting.
End of instruction: The instructions written on the file are processed from the top and continued until a
linefeed or EOF is found.
Key name Explanation How to specify the setting
Maximum
characters
Available
characters
(strings)
Necessary
/Arbitrary
JOB_ID Specify a job ID
for identification.
Specify a job ID that has not been used for existing
jobs.
(this ID is used in a STF file as hereinafter described,
and for canceling the job using a JCF file.)
When no job ID is specified, TD Bridge will
automatically create the ID.
40
characters
One byte
alphanumeric, "-", "_"
Arbitrary
PUBLISHER Specify a name
of disc publishing
machine to be
used for the job.
Use the name registered by EPSON Total Disc Setup.
When not specified, the publishing machine
specified in the Environment Setting of TD Bridge will
be used.
If the Environment Setting also has not specified the
machine, the machine registered by
EPSON Total
Disc Setup will be used as long as only one machine
has been registered.
(When multiple machines have been registered, an
error will occur)
64
characters
Machine names
registered by
EPSON
Total
Disc Setup.
Arbitrary
COPIES Specify the
number of discs
to be published.
[When the publisher is in Standard Mode]
Selectable from 1 to 1,000.
[When the publisher is in External Output Mode]
When the same disc type is specified for stacker 1
and 2
Selectable from 1 to 100.
When the disc type is different for each of stacker
1 and 2
Selectable from 1 to 50.
[When the publisher is in Batch Mode]
Selectable from 1 to 100.
[Common to the all modes]
When not specified, only one disc will be
published.
Four
characters
One bite numbers Arbitrary
OUT_
STACKER
Specify an output
stacker.
[When the publisher is in Standard Mode]
When selecting the stacker 2 as the output
stacker, specify
"2".
When selecting the stacker 4 as the output
stacker, specify
"4".
When not specified, the stacker specified in the
Environment Setting of TD Bridge is used.
If the Environment setting also has not specified
the output stacker, the stacker 2 will be used.
[When the publisher is Not in Standard Mode]
Invalid (ignored if a stacker is specified)
One
character
"2" or "4" Arbitrary
DISC_
TYPE
Specify the type
of disc to be
published.
Specify "CD" when publishing a CD.
Specify "DVD" when publishing a single-layer DVD.
Specify "DVD-DL" when publishing a two-layer DVD.
Six
characters
Any of "CD", "DVD",
"DVD-DL"
Necessary