User`s guide

Chapter 3 Setting

Displaying the confirmation message

If the publish mode is set to “Batch Mode”, the message is displayed before publishing the discs.

This is to avoid using and overwriting the prefabricated discs.

The messages are displayed in following conditions.

• When publishing the first disc after starting the computer.

• When publishing the first disc after the stacker 2 is removed and re-installation of it is detected.

• When detecting the state that the disc cover is closed after the stacker 2 is removed and re-installation

of it is detected during publishing a disc.

• When publishing the first disc after changing the publish mode from “Standard Mode”, or

“External Output Mode” to “Batch Mode”.

Stacker

Settings

Stacker 1,2 When “Standard Mode” is selected:

Select disc type for Stacker 1 that is used for blank discs.

Stacker 2 is used for ejected (published) discs.

When “External Output Mode” is selected:

Select disc type for both Stacker 1 and 2 that are used for blank

discs.

When “Batch Mode” is selected:

Select disc type for both Stacker 1 and 2 that are used for blank

discs. An error occurs if the disc type specified for Stacker 1 and

2 is different from that specified in the JDF file.

Drive

Settings

Drive to Use Select the drive to be used for writing data to the blank discs.

Select one from the following three options; “Use Both”, “Use

Drive 1 Only”, and “Use Drive 2 Only”.

Number of write

retries

Specify the number of retries in the case of writing errors. The

number can be entered in the range of 0 to 9.

Printer

Settings

Show error mark on

discs that

experience error

Tick the checkbox when you want to print an error mark on

published discs that may have been improperly burnt (an error

occurs during writing). This helps you to separate the failed

discs from the normal ones.

• The confirmation message is displayed only when the publish mode is set to “Batch

Mode”.

• For PP-100N, the next job is not executed unless discs are removed after one job is

finished. (A job can be executed, but no disc is published.)

Setting Item Explanation