User`s guide

Setting EPSON Total Disc Setup

EPSON Total Disc Setup allows you to configure major setting for publishing discs, such as PP-100 operation

mode selection, source/output stackers selection.

This section explains only about the required settings to be used by the cooperative application.

Click [Start]-[All Programs]-[EPSON Total Disc Maker]-[EPSON Total Disc Setup] to start EPSON Total Disc

Setup.

For Windows Vista, the [User Account Control] screen is displayed. Then, click [Continue].

Select the PP-100 to be used, and click [Properties].

EPSON Total Disc Setup Properties window is displayed. In the window, the following settings can be made.

• For PP-100N, settings other than the name cannot be changed.

• To change the settings of PP-100N, use EPSON Total Disc Net Administrator.

(See "Setting EPSON Total Disc Net Administrator" on page 3-32.)

Setting Item Explanation

Name You can change the name of PP-100/PP-100N. The name is

used to be specified in the JDF file using Publisher key.

Up to 64 characters can be used for the name.

You cannot register multiple PP-100/PP-100N with the same

name.

Stacker

Settings

Publish Mode Select the publishing mode from the following three options;

“Standard Mode”, “External Output Mode”, and “Batch

Mode”. See the PP-100 User’s Guide for more information on

the publishing mode.

Click

Select