User`s guide

29
Chapter 3 Setting
3
Setting Items List
In order to operate PP-100/PP-100N from the cooperative application, some settings must be made on the
related applications as shown in the table below.
● : The setting is required
▲ : Making the setting is possible (not related to the cooperative application)
-- : Making the setting is impossible
Category Setting Item JDF
TD Bridge
Environment
Settings
EPSON
Total Disc
Setup
Printer
Driver
EPSON
Total Disc
Maker
Remarks
Settings
related to PP-
100/PP-100N
operations
Publishing mode -- -- ● -- --
Disc type in the
stacker
-- -- ● -- --
Disc type to be
published
● -- -- -- --
Drive setting -- -- ● -- --
Number of retries -- -- ● -- --
Prints an error
mark or not
-- -- ● -- --
Source
-- -- -- ▲ --
TD Bridge automatically
detects the disc type
according to that
specified by the JDF file.
Output location
● ● -- ▲ --
The JDF setting is given
priority over the TD
Bridge setting. If the
stacker is not specified
in the JDF file, the TD
Bridge setting is applied.
Settings
related to
printing
Label type -- ● -- ▲ --
Color / Black -- -- -- ● --
Quality / Speed -- ● -- ▲ --
Bi-directional
printing
-- -- -- ● --
Color setting -- -- -- ● --
Label size -- -- -- ● --
Number of
copies
● -- -- ▲ --
One copy is made
when the number of
copies has not been
specified in the JDF file.
Drying time -- -- -- ● --
Settings
related to
terminal
computers
Working folder
-- -- -- -- ●
The setting items listed above are those available on the listed applications. The JDF file
includes more setting items, but those are omitted here.
For explanation on the working folder, see “Setting EPSON Total Disc Maker”.