User`s guide

Restrictions

❏ Pausing a job cannot be made by the cooperative application. Use EPSON Total Disc Monitor to

interrupt the job.

❏ While a job is processed, another job cannot interrupt the ongoing job, and publishing discs

directly from EPSON Total Disc Maker cannot be made.

❏ Status of progress of writing or printing cannot be obtained. A writing complete status also

cannot be obtained when both writing data and printing label jobs are performed.

❏ When confirming the job information of the STF file right after the job is issued, the status may

be shown as

STATUS=99 and ERROR=OTH000. In this case, wait for 5 seconds or more, and

then reconfirm the STF file.

❏ TD Bridge does not have a function to obtain job and error logs. Include the function in your

cooperative application if necessary.

❏ Create the JDF file, JCF file, file list file, and text item file in ANSI text format. Other than ANSI

such as Unicode, UTF-8 cannot be used.

❏ The supported versions of EPSON Total Disc Maker and TD Bridge are as follows.

●: Supported, ▲: Not supported

❏ PIN Controlled Mode and Security Mode for PP-100N is not supported.

TD Bridge

1.00 1.5X 2.0X

Epson Total

Disc Maker

1.0X ● ▲ ▲

1.5X ▲ ● ▲

2.0X ▲ ▲ ●