User`s guide

SETUP program options (continued)
Option
Parallel Port
Serial Port 1 (5)
Serial Port 2 (5)
Console
Redirection to
COM1
Console
Redirection to
COM2
Settings
Address 378H:
Compatible/lRQ7*
Address 278H:
Compatible/lRQ5
Address 378H:
Bi-directional/lRQ7
Address 278H:
Bi-directional/lRQ5
Disabled
Address 3F8H/IRQ4*
Address 2F8H/IRQ3
Address 3E8H/IRQ10
Disabled
Address 2F8H/IRQ3*
Address 3E8H/IRQ10
Address 2E8H/IRQ11
Disabled
Disabled*
1200 Baud
2400 Baud
9600 Baud
Disabled*
1200 Baud
2400 Baud
9600 Baud
Description
Select one of the Compatible
options to set the port for IBM AT
compatible signals: select one of
the Bi-directional options to set
the port for IBM PS/2 compatible
bi-directional signals; select
Disabled to prevent the port from
reacting to any signals (no
resources are allocated when
Disabled)
Select the address you want to
use for serial port 1; set to
Disabled to prevent the port from
reacting to any signals (no
resources are allocated when
Disabled)
Select the address you want to
use for serial port 2; set to
Disabled to prevent the port from
reacting to any signals (no
resources are allocated when
Disabled)
Set to Disabled to prevent
redirection of the computer’s
input and output to serial port 1:
set to the speed the computer
should use to copy the
redirected input/output to serial
port 1
Set to Disabled to prevent
redirection of the computer’s
input and output to the serial
port assigned as COM2; set to
the speed the computer should
use to copy the redirected
input/output to the port
Running the SETUP Program
2-9