Specifications

3-5

Front/Rear Panel

Analyzer Display

Figure 3-3 Analyzer Display (Single Channel, Cartesian Format)

The analyzer display shows various measurement information:

• The grid where the analyzer plots the measurement data.

• The currently selected measurement parameters.

• The measurement data traces.

Figure 3-3 illustrates the locations of the different information labels described below.

In addition to the full-screen display shown in the illustration above, multi-graticule and

multi-channel displays are available, as described in the “Making Measurements” chapter

of the user’s guide.

Several display formats are available for different measurements, as described under

in Chapter 5 , “Hardkey/Softkey Reference.”

1. Stimulus Start Value. This value could be any one of the following:

• The start frequency of the source in frequency domain measurements.

• The start time in CW mode (0 seconds) or time domain measurements.

• The lower power value in power sweep.

When the stimulus is in center/span mode, the center stimulus value is

shown in this space. The color of the stimulus display reﬂects the current

active channel.

Format