Specifications

7-8
Options and Accessories
Accessories Available
RF electronic calibration (ECal) modules and PC software
This product family provides electronic calibration (ECal) capability. With ECal, the usual
calibration kit standards are replaced by one solid-state calibration module. A full two-port
calibration can be done with a single connection, with reduced errors and wear on
connectors. ECal requires the 85097A PC interface kit, an 85060-series or 85090-series
calibration module with the appropriate connector type, and a network analyzer with
firmware version 7.68 and above.
NOTE For network analyzers with firmware versions between 7.60 and 7.68, a PC
with Windows
1
95, 98, 2000 or NT 4.0 loaded with software from the
85097A PC interface kit is used to perform the ECal calibration.
85097A ECal PC interface kit and software
Contains PC interface module for connecting an ECal module to a PC or a network
analyzer (with firmware version 7.68 and above) and PC ECal control software.
85062B Microwave ECal module (1 GHz to 26.5 GHz), 3.5-mm (m) to 3.5-mm (f)
connectors
Option 00F substitutes 3.5-mm (f) to 3.5-mm (f) Microwave ECal module.
Option 00M substitutes 3.5-mm (m) to 3.5-mm (m) Microwave ECal module.
Option 001 adds a 30 kHz to 9 GHz RF ECal module.
Option 00A adds:
3.5-mm (f) to 3.5-mm (f) adapter
3.5-mm (m) to 3.5-mm (m) adapter
85093B RF ECal module (30 kHz to 9 GHz), 3.5-mm (m) to 3.5-mm (f) connectors
Option 00F substitutes 3.5-mm (f) to 3.5-mm (f) RF ECal module.
Option 00M substitutes 3.5-mm (m) to 3.5-mm (m) RF ECal module.
Option 00A adds:
3.5-mm (f) to 3.5-mm (f) adapter
3.5-mm (m) to 3.5-mm (m) adapter
85060B Microwave ECal module (1 GHz to 18 GHz), 7-mm connectors
Option 001 adds a 30 kHz to 9 GHz RF ECal module.
85091B RF ECal module (30 kHz to 9 GHz), 7-mm
85064B Microwave ECal module (1 GHz to 26.5 GHz), 50 type-N (m) to 50 type-N
(f) connectors
Option 00F substitutes type-N (f) to type-N (f) Microwave ECal module.
1. Windows is a U.S. registered trademark of Microsoft Corporation.