Specifications

6-17
Error Messages
Error Messages in Alphabetical Order
OK TO ALTER CORRECTION CONSTANTS?
Error Number
186
This message is displayed as a prompt during operations when the correction
constants will be changed. Correction constants may be change in the
adjustment tests in the service menu.
ONLY LETTERS AND NUMBERS ARE ALLOWED
Error Number
43
You can only use alpha-numeric characters (and underscores) in disk file titles
or internal save register titles. Other symbols are not allowed, except for the
“underscore” symbol.
OPTIONAL FUNCTION; NOT INSTALLED
Error Number
1
The function you requested requires a capability provided by an option to the
standard analyzer. That option is not currently installed. (Refer to “Analyzer
Options Available” on page 7-3 for a description of the available options.)
OVERLAP! LIST TYPE CHANGED TO STEPPED
Error Number
211
The list type changed to stepped because one or more frequency segments in the
swept list table overlapped. Change the frequency ranges of the overlapping
segments and switch back to swept list mode.
OVERLOAD ON INPUT A, POWER REDUCED (ES only)
Error Number
58
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).
OVERLOAD ON INPUT B, POWER REDUCED (ES only)
Error Number
59
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).
OVERLOAD ON REFL PORT, POWER REDUCED (ET only)
Error Number
58
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).
OVERLOAD ON TRANS PORT, POWER REDUCED (ET only)
Error Number
59
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).